AUTHORIZED REPRESENTATIVE OF REL HIGH-INTENSITY VISIBLE SPECTRUM LED LIGHTING SOLUTIONS

REL WS LED Series feature image.
REL logo.

REL WS LED Series. High-intensity visible spectrum LED lighting solutions for ultra high-speed imaging.

REL WS1 LED.

WS1 16" LED Ring Light

Fixed-Focus High-Intensity LED Lighting System 

10 million lux • 100% duty cycle • variable output 0–100%

REL WS2 LED.

WS2 14" Hexagon LED

Flicker-Free High-Intensity LED Lighting System 

2400W • 250,000 lumens •  TIR lenses • flicker-free

REL WS3 LED.

WS3 7.25" Hexagon LED

120 LED 600W High-Intensity Lighting System 

120 LEDs • 600W • 66,000 lumens (250,000 lumens in burst mode) per module

REL WS4 LED.

WS4 2.5" Square LED

Compact & Versatile High-Intensity LED Lighting System 

225W • 6,000 lumens • 2.5 x 2.5 x 4.25 inches

Made in USA badge.

REL WS1-K with Shimadzu Hyper Vision HPV-X2 ultra high-speed video camera.
REL WS1-K with Shimadzu Hyper Vision HPV-X2 ultra high-speed video camera and FBL-1000 mount..
REL WS1 LED beam profile illustration

REL WS1 16

Fixed-focus high-intensity LED lighting system designed for direct lighting of material samples for ultra high-speed imaging during high strain rate testing (HSRT).

The REL WS1 16″ LED Ring Light features a continuous duty cycle, focusing hundreds of watts of light on an area of 1 square inch at a fixed focal distance of 12 inches. No flash duration or delay calculations needed. The output is dimmable from 0–100% to accommodate exposure, material sample reflectivity and various lens configurations.

TIR (total internal reflection) lenses illuminate material samples while the mounting frame allows coaxial alignment with your ultra high-speed camera, featuring quick adjustments for tilt and pan. Integrated fine lead screw adjustments are used for individual camera and lighting focal distance. The high-intensity continuous light source combined with the ease of adjusting and focusing ensures quick setups and consistent ultra high-speed imaging results.

REL divider.

REL WS1 16″ LED Ring Light Key Features:

  • High-intensity fixed focal point light source @ 10 million lux peak intensity
  • Shadow-free image with concentric TIR lens design for fixed-focus lighting to 12″
  • 100% duty cycle at maximum output
  • Variable output levels (0–100%)
  • Low infrared output & minimal sample heating
  • Quick adjust rail mount system for reliable tilt, pan & focus setup
  • IP67 Rated

Dimensions & Weight:

Dimensions (OD, ID, D): 16 x 6 x 2 inches (40.64 x 15.24 x 5.08 cm)

Weight: 15 lb (6.8 kg)

Ratings:

IP67 Rated – Dust Sealed & Waterproofed

ISO 9001:2015 Certified Company

IP67 Rated badge. ISO badge.

REL FBL-1000 Mounting Carriage

Mount your WS1 and ultra high-speed camera system to an REL Split Hopkinson Pressure Bar (SHPB) testing base platform. The rolling mounting carriage allows for perfect positioning for high strain rate test events.

Dimensions (WLH): 18 x 36 x 28 inches (45.7 x 91.4 x 71.1 cm)

Weight: 85 lb (38.5 kg)

 

REL divider.

 

UTM-1800 Universal Tripod Mount

  • Supports 250 pounds of lighting & camera gear
  • 36–84″ adjustable height
  • Machined geared housing for 90˚ tilt control & 360˚ pan control

Dimensions:

Height Range: 36–84 inches (91.4–213.4 cm)

Base Width: 43 inches (109.2 cm)

Weight: 50 lb (22.68 kg)

REL WS2 14

Flicker-free high-intensity adjustable focal length LED lighting system configured with 240,000 lumens at 96,000 candelas – allowing you to safely capture dymanic events up to 100 feet away at millions of frames per second.

The REL WS2 14″ Hexagon LED module is for those who need to reach out and light up events that need to be observed and recorded at a distance due to operator safety and camera destruction concerns. The WS2 module consists of 36 ultra high-intensity LEDs focused through TIR (total internal reflection) lenses to create concentrated 5˚ beams to ensure the light is centered on your target.

The REL WS2-K4 kit includes four modules and is available with a continuous rated power supply of 2 kilowatts running on a standard 120 volt circuit. WS2 modules can be mounted individually on tripods or with the optional WS2-K4 array mounting kit.  

REL divider.

REL WS2 14″ Hexagon LED Key Features:

  • Flicker-free illumination for ultra high-speed imaging
  • 2400 watts @ 240,000 lumens in 4 module array
  • 96,000 candelas
  • 5˚ beam
  • TIR lenses for focused lighting up to 100 feet
  • Adjustable 24″ to infinite focal distance
  • ~12″ spot at 4 meters with 600,000 lux peak intensity

 

REL divider.

 

REL WS2-K4 LED Flicker-Free High-Intensity Lighting System includes:

  • Four WS2 14″ Hexagon LED Modules
  • WS2-K4 Four Module Array Mount
  • UTM-1800 Universal Tripod Mount
  • Tripod
  • Controller
  • Magnetic Laser Alignment Sight included for quick & accurate beam focusing
  • PS2-48W Power Supply
  • Pelican™ cases

 

Dimensions:

WS2 14″ Hexagon LED Module (WHD): 14.37 x 12.75 x 3.34 inches (36.49 x 32.38 x 8.48 cm)

UTM-1800 with WS2-K4 Array Height Range: ~36–100 inches (~91.4–254 cm)

UTM-1800 Base Width: 43 inches (109.2 cm)

Weight:

Four WS2 14″ Hexagon LED Modules: 60 lb (27.2 kg)

UTM-1800 Universal Tripod Mount: 50 lb (22.68 kg)

WS2-K4 Module Array Mount: 15 lb (6.8 kg)

PS2-48W Power Supply: 45 lb (20.4 kg)

Shipping Weight: ~200 lb (~90.72 kg) with Pelican™ cases

 

Ratings:

IP67 Rated – Dust Sealed & Waterproofed

ISO 9001:2015 Certified Company

IP67 Rated badge. ISO badge.

REL WS2 14 inch LEDs mounted on tripods.
REL WS2 single, WS2-K4 and magnetic laer alignment sight.
REL WS2-K4 LED beam profile illustration.
REL WS3-K4, WS3 LED and Shimadzu HPV-X2.
REL WS3 LED System.
REL WS3-K4 and WS3-41-K4 LED beam profile illustration.

REL WS3 7.25

120 LED 600W high-intensity illumination solution for ultra high-speed imaging.

REL WS3 7.25″ Hexagon LED modules are elegantly designed and precision engineered with 120 high-intensity LED emitters with high-performance lenses. The 600W continuous output is variable from 0–100% to accommodate exposure, material sample reflectivity, and lens configurations. Each module includes input/output triggers which can be used to connect and coordinate your ultra high-speed testing events and features a magnetically attached laser alignment sight for precise beam adjustment.

WS3 LED modules feature a unique hexagonal design allowing for multiple modules to be combined in a variety of arrays to achieve the ultimate level of high-intensity LED illumination with a continuous duty cycle. This flexibility enables effective illumination to achieve high-quality digital image correlation (DIC) with a single ultra high-speed camera for 2D DIC or with multiple cameras for 3D DIC.

The high-intensity, high performance continuous light source combined with inherent expandability and focusing, ensures quick setups and consistent ultra high-speed image acquisition to light it up better than ever.

REL divider.

REL WS3 7.25″ Hexagon LED Key Features:

  • 600W continuous output
  • 66,000 lumens
  • 250,000 lumens in burst mode
  • 147,000 candelas
  • 28˚ beam (WS3)
  • 41˚ beam (WS3-41)
  • 65″ FWHM* spot at 4 meters
  • 13,000 lux at 4 meters peak ???
  • Thermal shutoff protection
  • Tripod ready, 1/4–20 threaded holes for a variety of mounting options
  • Cable length up to 50′
  • Magnetic Laser Alignment Sight included for quick & accurate beam focusing

* Full Width at Half Maximum

Dimensions & Weight:

Dimensions (WHD): 7.25 x 8 x 2.625 inches (18.42 x 20.32 x 6.67 cm)

Weight: 5.8 lb (2.63 kg)

Ratings:

IP68 Rated – Dust Sealed & Waterproofed

ISO 9001:2015 Certified Company

IP68 Rated badge. ISO badge.

REL WS4 2.5

2.5″ Square 30 LED 225W compact high-intensity illumination solution for ultra high-speed imaging.

REL WS4 2.5″ Square LED modules are compact and versatile high-intensity illumination for ultra high-speed applications. Engineered with high efficiency pin fin heat sinks allows for continuous duty light power intensities that were previously only available with burst mode power supplies. This feature allows simplified On/Off control while remaining compact, quiet and intensely bright.

The WS4 2.5″ Square LED module has twelve 1/4–20 threaded mounting points (three on each side) that allows it to be used individually with a common tripod and RAM® mounts or linked together in larger arrays with custom mounts. Featuring a standard 15 degree beam angle with options for angles up to 60 degrees and custom color emitters, the WS4 2.5″ Square LED can be tuned or scaled for any application to light it up brighter than ever.

REL divider.

REL WS4 2.5″ Square LED Key Features:

  • 225W continuous output
  • 16,000 lumens
  • 164,000 candelas
  • 15˚ beam
  • 40″ spot @ 4 meters
  • 10,500 lux @ 4 meters
  • 12 1/4–20 threaded holes for a variety of mounting options

     

    REL divider.

     

    REL WS4-K LED Kit:

    • WS4 2.5″ Square LED Module
    • PS5 225W Power Supply
    • TRM-100 Tripod
    • 20′ cable
    • Pelican™ case

     

     

    Dimensions & Weight:

    WS4 2.5″ Square LED Module (WLH): 2.5 x 4.25 x 2.5 inches (6.35 x 10.8 x 6.35 cm)
    Weight: 1.2 lb (.54 kg)

    PS5 Power Supply (WLH): 2.5 x 9 x 1.5 inches (6.35 x 22.86 x 3.8 cm)
    Weight: 2.6 lb (1.18 kg)

    Ratings:

    IP65 Rated – Dust Sealed & Waterproofed

    ISO 9001:2015 Certified Company

    IP65 Rated badge. ISO badge.

    REL WS4 2.5 inches Square LED on tripod.
    REL WS4-PS6-K4 LED kit with PS6 power supply. REL PS5 power supply.ED
    REL WS4 LED beam profile illustration.

    REL logo.

    REL WS LED Series Output Data.

    Specifications current as of September 2022 and are subject to change.

    REL WS LED Series Output Data chart.

    LEDs can be mounted on tripods or arranged in an array with available mounting brackets.

    REL Power Supplies for LED Lighting Solutions

    Power options to light up your research!

    REL Profusion X PS1-LITE power supply.

    HEX-700-PS1-LITE

    Compact continuous duty power supply with basic ON/OFF control.

    • Compact & lightweight

    • Basic ON/OFF control
    (no dimming, trigger or fan override)

    • Remote control with 12′ cable*

    • 6′ power cable*

    REL Profusion X PS1 power supply.

    HEX-700-PS1 & HEX-700-PS3

    Continuous duty power supply with dimming, trigger, & fan override options.

    • Fully dimmable for setup & area lighting

    • 10–100% dimming in continuous mode

    • 0–10V dimming BNC trigger port

    • Fan override mode for noise sensitive applications

    • Remote control with 12′ cable*

    • 6′ power cable*

     

    HEX-700-PS3 includes:

    Continuous duty power supply with dimming, trigger, fan override options & burst mode. 

    • Same features as PS1

    • 10–20 second burst mode

    • 2,400 watts burst

    • 204,000 lumens burst

    • Remote control with 12′ cable*

    • 6′ power cable*

    REL Profusion X PS4 power supply.

    HEX-700-PS4

    Capacitive power supply with low power continuous & high power burst modes:

    • 150W dimmable low power setup mode

    • Triggered high power burst mode up to 17kW

    • 1–2 second burst output duration typical

    • 5V BNC trigger port

    • Fan override mode for noise sensitive applications

    • Remote control with 12′ cable*

    • 6′ power cable*

    * Extensions and splitter cables available

    What are you waiting for?

    Press the button already or call 1-888-43HADLAND (1-888-434-2352) to get your REL WS LED Series Lighting Solution (or at least find out more information).

     

    Light It Up. Brighter Than Ever.

    I want my REL WS LED Series Lighting Solution!